Cart 
4-Port stacking module (IEEE 1394) for DGS-3212SR/3312SR
Product features:
4-port stacking Module
Email list
SFPs,GBICs, media converters
200Mbps Power Line Adapter with built-in 1 RJ-45 10/100Mbps Port
Product Features:
| • | Wall-to-Wall Home Networking |
| • | Create or Expand a Network Using Your Home's Existing Electrical Wiring* |
| • | Expand Your Network without Running New Wires |
| • | Enable Web Access to Computers, Game Consoles, and HD Media Players USE EXISTING WIRING TO CREATE A HOME NETWORK THE ULTIMATE IN MULTIMEDIA STREAMING CONVENIENTLY CONNECT With hassle-free plug & play installation, D-Link’s PowerLine HD Ethernet Adapter (DHP-300) and Starter Kit (DHP-301) are an ideal solution to create a wall-to-wall home network.
|
Express PowerNetwork Ethernet-to-Powerline Bridge
The D-Link DHP-100 is a plug-and-play Ethernet-to-Powerline Bridge providing a convenient way to extend the range of a wireless access point or router. It is especially useful for homes or small offices when concrete walls, elevator shafts, successive floors in multi-storied buildings, or other architectural impediments inhibit the wireless signal. By taking advantage of the existing electrical wiring in a home or small office, two or more D-Link DHP-100s can extend a wireless access point or router's range without drilling holes into walls to run additional networking cables. The D-Link DHP-100 is fully compliant with HomePlug PowerLine Alliance Industry Specification v1.0, assuring that it will link with other powerline devices.??The DHP-100 transmits data reliably even in noisy media environments by intelligently adapting to strong signal channels. This Ethernet-to-Powerline Bridge uses proven Orthogonal Frequency Division Multiplexing (OFDM), an advanced signal processing techn
802.3af capable PoE Splitter to use with PoE Switch
Product Features:
| • | Deliver Power up to 328* Feet (100m) Away |
| • | 802.3af Compliant Power over Ethernet |
| • | Plug & Play Installation D-Link, an industry leader in networking, introduces the DWL-P50 Power over Ethernet (PoE) Adapter. By using the DWL-P50, both data and electrical power can be delivered to a non-PoE Ethernet-enabled device from a single CAT5 Ethernet cable. The DWL-P50 is simple to install and requires no tools or software. Multiple DWL-P50 terminal units complement any PoE injector unit or midspan switch to provide small to medium business settings a complete end-to-end PoE solution. In addition, this unit supports 802.3af ensuring compatibility with other 802.3af PoE compliant injector units or midspan switches. Its compact size makes implementation extremely easy. During setup, this terminal unit can be set to power up any compatible 5V or 12V Ethernet-enabled device** via the volt selector located on the back. Using the convenience of Power over Ethernet, you eliminate the need to place an Ethernet-enabled device, such as a wireless access point or an Internet camera near a power outlet. Having to manage only an Ethernet cable simplifies the physical installation of the device. You can now mount these devices on a ceiling or outside, up to 328 feet (100m)* from a power source. With PoE, both power and data can be transmitted using standard Ethernet cabling with virtually no reduction in data throughput. Use the DWL-P50 with Ethernet-enabled devices where power outlets are not readily available and with any compatible PoE power source.
|
Power Over Ethernet (POE) Adapters-5V/12V DC
Product Features:
| • | Transmit Power up to 328 Feet (100m)* |
| • | Adjustable Output Power |
| • | Plug & Play Installation D-Link, an industry leader in networking, introduces the DWL-P200 Power over Ethernet (PoE) Adapter. The DWL-P200 delivers both data and electrical power to Ethernet-enabled devices using a single Ethernet cable. Using Power over Ethernet, you eliminate the need to place an Ethernet-enabled device, such as a wireless access point, near a power outlet, giving you more freedom in placement. The DWL-P200 Power over Ethernet (PoE) Adapter is simple to install, requiring no tools and no software. Its compact size makes implementation of the DWL-P200 easy. Plug the base unit into a power outlet, and then connect the terminal unit to your network device using any standard Ethernet cable. Once set up, the terminal device unit can output power** to any compatible 5V or 12V Ethernet-enabled device. The DWL-P200 simplifies your installation of Ethernet-enabled devices, such as an Internet camera or wireless access points, by allowing you to place it beyond the range of standard power outlets. You can now mount these devices to a ceiling or outside without placing them near a power supply. With the DWL-P200 Power over Ethernet (PoE) Adapter, both power and data can be transmitted up to 328 feet (100m)* using standard Ethernet cabling with virtually no reduction in data throughput. Use the DWL-P200 with Ethernet-enabled devices where power outlets are not readily available.
|
Features & Benefits
Flexibility in Gigabit Ethernet Connections
This SFP (Small Form-factor Plug-in) transceiver enables one 1000BASE-LX connection. SFPs have a form factor one-half the size of current industry standards.
SFPs can be mixed and matched on a given switch to maximize flexibility. However, the connection and associated port at the remote end must match the chosen SFP connection type.
This SFP transceiver can be used in those 3Com switches and modules which support SFP modules. A current list of these products can be found under the "Specifications Tab" under the heading "This Product Supports".
Features & Benefits
Flexibility in Gigabit Ethernet Connections
This SFP (Small Form-factor Plug-in) transceiver enables one 1000BASE-SX connection. SFPs have a form factor one-half the size of current industry standards.
SFPs can be mixed and matched on a given switch to maximize flexibility. However, the connection and associated port at the remote end must match the chosen SFP connection type.
This SFP transceiver can be used in those 3Com switches and modules which support SFP modules. A current list of these products can be found under the "Specifications Tab" under the heading "This Product Supports".
Features & Benefits
Flexible Gigabit Ethernet Connections
A Gigabit Interface Converter (GBIC) is an industry-standard modular transceiver that offers increased flexibility for Gigabit Ethernet connections.
This GBIC transceiver can be used in those 3Com switches and modules which support GBIC modules. GBICs can be mixed and matched on a given switch to maximize flexibility.
Features & Benefits
Flexible Gigabit Ethernet Connections
A Gigabit Interface Converter (GBIC) is an industry-standard modular transceiver that offers increased flexibility for Gigabit Ethernet connections.
This GBIC transceiver can be used in those 3Com switches and modules which support GBIC modules. GBICs can be mixed and matched on a given switch to maximize flexibility.
